|
Gas Leak Detector PEAKER
Gas leak detector for quick and selective detection of different gases
- with sensor with wide detection range suitable for different gases – can be switched to be sensitive for
| Methane (CH4) |
| Propane (C3H8) |
| Hydrogen (H2) |
- with set-button for suppression of background gases
- microprocessor controlled unit
- LED- and digital display of gas concentration, from low ppm range to ”Lower Explosive Limit” (LEL) in Vol%
 - automatic Zero setting
- acoustic signal depending on concentration (can be switched off)
- acoustic and visual warning when 4 set alarm points are exceeded
- automatic sensor check with error recognition
- service button in keypad for adjustment
- separate charger for recharging of built-in power pack
- LED-display for following measuring ranges:
| 1 green operation/ppm |
| 2 yellow = 10 ppm |
| 3 yellow = 100 ppm |
| 4 red = 0,1 Vol% |
| 5 red = 1 Vol% |
Operating time: min. 8 hours
Storage temperature: -25 ... +50°C
Operating temperature: -25 ... +40°C
 Accessories: mains charger unit, input 230 V ~ / 50 Hz / 3.5 VA, output 12 V = / 150 mA / 1.5 VA
Technical data:
Sensor element: HL-gas sensor,
series GGS 1000 (wide range),
series GGS 3000 (Ch4 selective)
Dimensions instrument: (190 x 40 x 28) mm (LxWxH)
Dimensions sensor head: (18 x 40) mm (DxL)
Weight: 320 g complete
Power consumption: 0,85 VA
Power supply: NiMH 4 x 1,2 V 1600 mAh
Operating time: min. 8 hours
Storage temperature: -25 ... +50°C
Operating temperature: -25 ... +40°C
Accessories: 1 mains charger unit, input 230 V ~ /50 Hz / 3,5 VA, output 12 V = /150 mA / 1,5 VA
|
