General Electrodes and Equipments Limited better known as GEE Limited as established in 1969, in technical alliance with Messer Griesheim GmbH of Frankfurt , Germany for the manufacture of Quality Welding Electrodes. GEE Limited is an ISO 9001:2000 company accredited by Det Norske Veritas.

At GEE Limited, we manufacture an extensive range of welding electrodes for application on General Fabrication to construction of Nuclear Equipment. Our entire manufacturing of the Electrodes is done at Thane where we have a 1 ton dry mixer which is one of the biggest setup in the industry. Thus, GEE Limited being one of the biggest Extruders has an edge over the other manufacturers in the industry when it comes to reliability and consistency in the quality of the product and bigger sizes. This is possible with the joint effort of a dedicated team of enthusiastic professionals who deliver value products that congregate the stringent quality code requirements of various agencies and clients.

Tubular Electrodes--->> GEECOR 90

Complex carbide tubular electrode to resist abrasion at high temperatures
Flux coated tubular electrode which gives the user low heat input and infinite shelf life. The flux coating of electrode is non-hygroscopic. The weld metal consists of complex high temperature carbides, with high-stress abrasion resistance withstanding moderate to heavy impact even at high temperature.

Characteristics:

• Exceptional resistance to severe abrasion and moderate to heavy impact at elevated temperature.
• Unmatched deposition rates-high integrity deposits.
• Compared to solid cored electrodes, the current requirement is low so the dilution by parent metal is contained to a minimum.
• Non - hygroscopic coating needs no storage precaution -infinite shelf life.

Alloy Base:

C, Cr, Mo, V

Typical Application:
Coal burner nozzles, clinker conveyor chains, railway tampers, sizing screens, augers, agricultural implements, rolling mill guides, heat resistant steel castings, pump casings, I.D. fans, tie rods, pug mill and augers, brick press screws, etc. where high stress abrasion is the major factor of wear at high temperatures.

Mechanical Properties of the weld metal (Range):
Hardness…………………………: 56 - 62 HRC

Filler Wires--->> GETIG 70SG

Specifications:
AWS A/SFA 5.18 CLASS : ER 70SG
Description:
General Purpose TIG Welding Rod for welding of plates, pipes and tubes

Characteristics:

• Smooth flow, gives shiny welds of radiographic quality.

Typical Application:
General Purpose TIG welding of the following grades of steel in the form of plates, pipes and tubes.
ASTM A-285 Grade C, A-515 Grade 60, A-515 Grade 70, A-516 Grade 60, 70, DIN 17155 Grade II, III, IV, etc., ASTM A-106 Grade B, A-53 Grade B etc. ASTM A-179, ASTM A-214, etc.

Packaging Specification:
Supplied in cut lengths of 1 meter packed in 5 kgs carton