Roots (Twin Lobe) Blowers
Roots Air Blower / Twin Lobe Compressor is a Positive displacement, Constant Volume Machine to operate against varying pressures. With each revolution, the Compressor delivers a metered amount of air measured at inlet conditions. Operating at a constant speed against almost constant pressure, it delivers constant stream of pressurized air flow. No Contamination, No Oil, No Spring, No Valves or Vanes, No internal contact of any parts and hence is free of wear and tear.

Mechanical Vacuum Boosters
The volumetric performance of the conventional Vacuum Pumps become very poor in low pressure operations. Since Twin Lobe Mechanical Boosters are capable of handling large quantity of air even at this stage, they are brought in conjugation with the existing Vacuum Pump to boost its performance both Volume & Vacuum wise. Combined energy required by this system is far less than that of any single pump would had consumed for the equivalent job. Since the Boosters are totally free of any sealant fluid hence the pumping is dry.

Horizontal Centrifugal Chemical Process Pumps in SS
High quality SS 304/316 Material of Construction ensures Effective Resistance to Corrosive Liquids & Slurries and hence pumps made from this metal, undisputedly stands as an ultimate choice of every discerning user to resist the violent attacks of such Hot and Cold Corrosive Mediums in their Process industries. Applications: Hot and Cold Chemical Process Service, Thermic Fluids, Chemicals, Petrochemicals, Sugar, Textiles, Effluent, Pharmaceuticals, Labs and Pilot Plants.

Pullout Type Corrosion Resistant Chemical Process Pumps
The most sought after Corrosive Abrasion Resistant Pump made from Compressed Moulded Inert Polypropylene. Excellent for host of Highly Corrosive and Hazardous Pumping Operations. The pump is designed for Back Pull-out. The complete Rotor Assembly can be pulled out if and when required for repairing and refitting there after without disturbing the casing, suction / delivery piping and the motor.

Magnetic Drive Chemical Process Pumps
Magnetically Driven, this is a Wonder Pump and is 100% guaranteed Leak Proof. The medium does not come in contact with shaft, hence no leakage at all. Pollution of course is out of question. Light weight, Easy installation, Cost Effectiveness, Compact Designing, Portability, Reliability, Safety & above all Chemical Resistance are a few distinctive features of this special purpose popular device. These are best suited for Photo Cine, X-Ray Plants, Filtration Systems, Photo Processors, Electroplating, Metal Finishing Machines, Water Treatment, Descaling, Chemical & Pharmaceutical Industries etc.

Vertical / Submersible Chemical Process Pumps
Its Non-clogging features combined with ability to handle liquids containing small solids have made it quite popular with the Electroplating Units. Uniform consistency of Highly Abrasive Chemicals is achieved and maintained through Continuous Vigorous Stirring done by this unique pump. Consequently this adds to shine and gloss of the end product. Besides, it has also found favour with TV Tube Manufacturing, Glass Etching, Refrigeration, De-scaling, Pharmaceutical Industries, Chemical Processing Plants and Photo Film Processing Units as well.

Mud / Sewage Pumps
Single Stage, Horizontal, Centrifugal, Self Priming, End Suction, Mud / Sewage Pumps are of Non-clog type. These have Semi-open Type, Dynamically Balanced Impeller for Vibration Free Operation and hence have longer life. These are best suited for applications where self priming action is required such as pumping water from docks, Ports, Vessels; Pumping Petroleum Products, Chemicals, Effluent Water, Filter Press; Dewatering foundations, Trenches & Pits, Sewage pumping etc.

Rotary Gear Pumps
Gear Pumps are the most commonly used pumps for Handling and Transferring any kind of Viscous Liquids, may these be Petroleum & Food Products, Dyes, Syrups, Corrosive Chemicals, Soaps, Detergents, Starch, Asphalts, Ink & Paints etc. These are Highly Efficient and Low Cost Positive Displacement Pumps. These are available in both C.I. and S.S. Material of Construction. Jacketed Pumps are also available which are required for handling substances like Wax which needs to be turned into Fluids prior to moving them.

Metering / Dosing Pumps
Metering/Dosing Pumps are Plunger or Diaphragm type Positive Displacement Pumps used for feeding Intermittently or Continuously a controlled quantity of Liquid Chemical within pre-determined time or at fixed intervals. Quantity of the dose, intervening time can be regulated even while in operation.