High-Tension Igniters

Oil and gases are commonly used as fuel in industrial & domestic boilers, hot air generators & cooking ranges. Lighting of the burners is achieved by the spark genrated between a pair of insulated elctrodes (5mm gap), placed adjacent to the burners and connected to a high voltage (10 Kv), low current (25Ma) power supply. In some burners, a single electrode is used by grounding the current through the metal framework. NTB uses a special corrosion and spark-erosion-resitant alloy which is suitable for 1400C continuous-duty operating temperatures and outlast the traditional high nickel electrodes rated at 1200C. NTB Cera Tuff Al95 Alumina Insulators provide excellent mechanical & dielectric strengths. This allows for designs with substantial clamping arrangements & reduced risk of accidental breakage in handling, storage and usage. NTB AGNI Clamped Insulator Igniters are designed for mounting in a fixed clamp, split collar, cast electrode housing etc. with grub screws tightened directly against the insulators. In other designs, Igniters are mounted on a female threaded boss on the burner casing, with the electrode protruding into the casing. NTB AGNI Igniters can also be manufactured to customer designs.

Some Valued Clients:
* GODREJ & BOYCE
* THERMAX
* PRIME SOLUTIONS
* EXIDE
* LIPI BOILERS
* SELPLAN