FLOOR STANDING CABINETS
EMC CABINET

The Electromagnetically Compatible (EMC) cabinet family from APW President is based on an extremely rugged steel 19" enclosure system. These cabinets provide a high level of RFI shielding so as to protect sensitive electronic equipment housed inside them against interference from external electromagnetic radiation. They also prevent radiation from internal equipment affecting other nearby delicate instrumentation.

These EMC cabinets have been carefully engineered to provide between 30 - 55 db of signal attenuation in the frequency range of 1 MHz - 1000 MHz. The RFI gaskets used are combination elastomer gaskets which provide not just radiation sealing, but environmental sealing as well. if enhanced shielding performance is required, Be-Cu gaskets can also be provided on request. This family of EMC cabinets can handle upto 900 kgs of equipment load and have passed Zone3 Seismic testing. They can also meet Zone4 Seismic requirements with the addition of a simple Zone 4 Kit.

EMC cabinet shown fixed on a base frame

Features

• Conform to DIN 41494
• Front and rear door made of 1.5 mm thick sheet steel
• All doors and panels are electro zinc plated (with yellow chromate passivation) on the inside so as to provide high conductivity
• Doors are provided with strong hinges and a 3-pt locking system to ensure proper sealing against radiation
• Load rating upto 900 kgs. Sizes Heights : 30U, 36U, 38U & 42U Widths : 600 mm Depths : 650, 800 and 1000 mm